FI700/WM/MT/SOUR – Loop Powered Sounder with LST/700 protocol ARGUS SECURITY
The red Loop Sounder FI700/WM/MT/SOUR is powered and actuated via the ADM loop with Labor Strauss/700 protocol. The sounders can be activated by a Fire Detection Control Panel Series BC216 with one of the following three tone types, depending on the parameter setup and the system condition:
• Slow Whoop tone according to NEN 2575,
• DIN tone according to DIN 33404,
• Continuous tone 990Hz.
If several sounders are activated at the same time, they are synchronised by the control panel, in order to generate a uniform warning tone. The sound level can be easily adjusted by means of a potentiometer.
The address of the sounders is set in the range 1 to 240 by means of the Programming Unit FI700/PU. Alternatively, the sounder can be addressed automatically if it is connected to a compatible fi re detection control panel.
An integrated dual-isolator disconnects the loop in case of a short circuit. In this way, the undisturbed communication with the loop elements outside the faulty loop section is ensured.
The robust plastic case is equipped with a deep mounting base and is designed for indoor wall mounting.
FEATURES & BENEFITS
- ADM loop technology with Labor Strauss/700 protocol
- Can be activated with three different tone types
- Sound level adjustable
- Optionally with protection class IP66
- Low power consumption
- Integrated dual-isolator
- Operating voltage : Supply through loop voltage
- Current consumption from loop : typ. 70μA (sounder off), max. 11mA (sounder on)
- Sound level : 100dB(A) at 1m distance
- Tone type 1 : Slow Whoop tone (NEN 2575; 500 - 1200Hz over 3.5s, 0.5s pause)
- Tone type 2 : DIN tone (DIN 33404; 1200 - 500Hz over 1s)
- Tone type 3 : continuous tone 990Hz
- Ambient temperature : -10°C to +55°C
- Protection class : IP21
- Dimensions W × H × D : 108 × 108 × 95 (mm)
- Weight : 255g
- Approvals : VdS G209211, 0832-CPD-1064