solo detector tester
Solo A10 Smoke Detector Test Gas Canister 150ml (Non-Flammable) - SOLOA10-001 - No Climb
Detector test equipment
Smoke Detector Test Gas Canister
Solo A10
Solo A10 Smoke Detector Test Gas Canister 150ml (Non-Flammable)
The new Solo A5 and Solo A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world. Solo A10 is positioned very much as the ‘every day’ tester. If a flammable solution is essential, there is the Solo A5.
The Solo A10S due to its 250ml bottle size fits directly into the Solo 330/332, but can also be used as a hand-held gas canister. Test gas works by delivering smoke particles to the detector under test, replicating the conditions of smoke from a fire in a safe and clean manner.
Solo A5 and Solo A10 have been created to use different gasses to the Solo A3, this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment. Therefore, as of the 31st December 2017 No Climb will no longer be able to manufacture Solo A3, stock already produced can still be used and a limited quantity can be bought from us while stock lasts.
What No Climb products are affected?
The new regulations mean that Solo A3, Solo A7, Aero 300 & Chekkit Smoke gas canisters will be phased out.
When will they be phased out?
The manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017, however we do still have very limited stock of these products but once they’re all gone we will not be ordering any surplus stock up, please Contact Us to find out more.
Will They be replaced?
Two aerosols are being brought out – Solo A5 and Solo A10 which can be used in the Solo 330 dispensers, both products will offer a comparable performance to Solo A3. The Solo A10 offers a 150ml version; which will be suitable for replacing the Aero 300 hand-held smoke gas canister, alternatively the SmokeSabre will also be a relevant replacement. Unfortunately, the Solo A7 detector air duster is not going to have a replacement.
Recently Viewed
Detector Removal Tool SOLO200-001 No Climb products
Fire sounder-beacon, multi tone, high output, IP66 ASW377
Sounder/Beacon, Multi Tone, High Output, IP66, Red Flash - ASW377
32 zones Gas Control Panel Multiscan S1 STMTSS1-32B
32 zones Gas Control Panel ATEX and SIL1 ABS housing Multiscan++S1 Sensitron STMTS/S1-32B
R448 Gas Detector - Explosion Proof Enclosure Version S3956R448
R448 Gas Detector 0-2000 ppm 4-20mA - Infrared sensor - SMART3G-C2 Sensitron Explosion Proof Enclosure version Zone 1 category 2 areas S3956R448
Carbon Dioxide Gas Detector - Dust Proof Enclosure Version S2631CO2
Carbon Dioxide Gas Detector, CO2 Gas Detector 0-2% Vol 4-20mA - Infrared sensor - SMART3G-D3 Sensitron Dust Proof Enclosure Version with display Zone 2 category 3 areas S2631CO2
Integrated UV/IR 4.4 micron Flame Detector Explosion Proof enclosure 40/40C-L4B for hydrocarbon-based fuel fires and non-organic fires SharpEye Spectrex
Methane Gas Detector - Dust Proof Enclosure Version S2623ME
Methane Gas Detector, CH4 Gas Detector, Natural Gas Detector 0-100% LFL 4-20mA - Infrared sensor - SMART3G-C3 Sensitron Dust Proof Enclosure Version Zone 2 category 3 areas S2623ME
Methane Gas Detector - Dust Proof Enclosure Version S2156ME
Methane Gas Detector, CH4 Gas Detector, Natural Gas Detector 0-100% LFL 4-20mA - Catalytic sensor - SMART3G-D3 Sensitron Dust Proof Enclosure Version with display Zone 2 category 3 areas S2156ME
Iso Propyl Alcohol Gas Detector - Explosion Proof Version S2157IP
Iso Propyl Alcohol Gas Detector, propan-2-ol Gas Detector, Isopropanol Gas Detector 0-100% LFL 4-20mA - Catalytic sensor - SMART3G-D2 Sensitron Explosion Proof Enclosure Version with display Zone 1 category 2 areas S2157IP
SF6 Gas Detector SMART3-R S4613SF6
SF6 Gas Detector, Sulfur hexafluoride Gas Detector 0-2000 ppm 4-20mA - Infrared sensor - SMART3-R for non classified area S4613SF6 Sensitron
English (UK)
Français (FR)



