solo detector tester
Solo A10 Smoke Detector Test Gas Canister 150ml (Non-Flammable) - SOLOA10-001 - No Climb
Detector test equipment
Smoke Detector Test Gas Canister
Solo A10
Solo A10 Smoke Detector Test Gas Canister 150ml (Non-Flammable)
The new Solo A5 and Solo A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world. Solo A10 is positioned very much as the ‘every day’ tester. If a flammable solution is essential, there is the Solo A5.
The Solo A10S due to its 250ml bottle size fits directly into the Solo 330/332, but can also be used as a hand-held gas canister. Test gas works by delivering smoke particles to the detector under test, replicating the conditions of smoke from a fire in a safe and clean manner.
Solo A5 and Solo A10 have been created to use different gasses to the Solo A3, this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment. Therefore, as of the 31st December 2017 No Climb will no longer be able to manufacture Solo A3, stock already produced can still be used and a limited quantity can be bought from us while stock lasts.
What No Climb products are affected?
The new regulations mean that Solo A3, Solo A7, Aero 300 & Chekkit Smoke gas canisters will be phased out.
When will they be phased out?
The manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017, however we do still have very limited stock of these products but once they’re all gone we will not be ordering any surplus stock up, please Contact Us to find out more.
Will They be replaced?
Two aerosols are being brought out – Solo A5 and Solo A10 which can be used in the Solo 330 dispensers, both products will offer a comparable performance to Solo A3. The Solo A10 offers a 150ml version; which will be suitable for replacing the Aero 300 hand-held smoke gas canister, alternatively the SmokeSabre will also be a relevant replacement. Unfortunately, the Solo A7 detector air duster is not going to have a replacement.
Recently Viewed
Tester Head kit connected for smoke and heat fire detectors Testifire-XTR2-001 No Climb Products
External Ventline Power Pack for Connection of 24VDC-drives ACX1
External Ventline Power Pack for Connection of 24VDC-drives ACX1 D+H
8 Relay Module for GALILEO MULTISCAN gas panel Sensitron
8 Relay Module to connect to STG/OUT16 outputs for GALILEO MULTISCAN gas panel Sensitron STG/8REL
Halogen Free Twisted & Shielded Fire Resistant Cable with two wires of 1.5mm2 available in 500m - Moreley-IAS - Honeywell
Analogue Photoelectric Smoke Detector Opal NFX-OPT-IV
Analogue Photoelectric Smoke Detector Yvory Opal NFX-OPT-IV Smoke Detector NOTIFIER
Ammonia Gas Detector - Dust Proof Enclosure Version S2134AM
(NH3) Ammonia Gas Detector, Azane Gas Detector, Hydrogen nitride Gas Detector 0-1000 ppm 4-20mA - Electochemical cell - SMART3G-C3 Sensitron Dust Proof Enclosure Version Zone 2 category 3 areas S2134AM
Fire sounder, intrinsic safe, multi tone, surface mount AS372
Fire sounder, intrinsic safe, 49 Tones user selectable, surface mount - AS372 UTC Fire & Security
Alarmline II Digital LHD Cable 105°C (221°F) w/ PP Sheath AD105P-1000
Digital Linear Heat Detection (LHD) cable 105°C (221°F) with Polypropylene Sheath Alarmline II, 1000m - AD105P-1000 - ProReact F1077
SF6 Gas Detector SMART3-R S4613SF6
SF6 Gas Detector, Sulfur hexafluoride Gas Detector 0-2000 ppm 4-20mA - Infrared sensor - SMART3-R for non classified area S4613SF6 Sensitron
R1234YF Gas Detector SMART3-H-FM LITE S4672R1234YF
R-1234yf refrigerant Gas Detector, HFO-1234yf Gas Detector 0-5000 ppm 90-240 Vac - Infrared sensor - SMART3-H-FM LITE for non classified area S4672R1234YF Sensitron
English (UK)
Français (FR)



