5 to 60m Microwave Monostatic Sensor FM60-V
5 to 60m MicroWave Monostatic Sensor (Volume) FM60-V 9.375GHz - Forteza
FM60-V - 5-60m Microwave Monostatic Sensor, Volume 9.375 GHz - FORTEZA
Sensors are used to detect an intruder in the protected area. Objects to protect can be separate areas of the perimeter, open and closed sites, storehouses, tunnels, trestles, etc.
Operating principle : The sensor has one electronic module including a transceiver. The transmitter emits microwave energy into the protected area. At normal conditions where there isn’t any intrusion Rx establishes a signal testing level reflected from objects in the protected area.
When an intruder moves in this area, he makes changes in the signal testing level; the receiver registers these changes and generates an alarm.
Thanks to the unique technology - division of the detection zone into subzones – the sensors are allowed to be insensitive to objects outside the detection zone even to trucks, trains or planes.
Sensors can be adjusted from the sensor`s unit or using special software which displays noise, original signal level and allows setting the optimal operating mode even remotely from the control room.
FM60 (Volume) - Detection length : 60m - Detection width : 15m - Detection zone height : 15m

FEATURES & BENEFITS
The detection zone is divided into subzones with possibility to adjust each of them separately. Thanks to this function sensors have high detection probability keeping at the same time minimum false alarms.
Disconnecting subzones it can be organized a free passage for people or transport through the gate or entrance to the building. Moreover using soſtware it can be possible to organize passages by time.
The unique signal processing algorithm and possibility to disconnect the first subzone reduce considerably the influence from neighboring objects and raise the noise immunity to rain, snow, fog, lightning, small animals and low vegetation.
Sensors have the frequency splitting into so-called “frequency letters” allowing them to operate in close proximity to each other.
Sensors can be connected to many popular control panels.
Recently Viewed
50m Dual Technology Bistatic Sensor MIR-B50
5-50m Dual Technology MicroWave Bistatic Sensor 24.15GHz MIR-B50 - Forteza
The new standard for functional testing of smoke detectors SOLO365 - No Climb
Fire sounder-beacon, high output, outdoor AS371
Fire sounder-beacon, High sound output, xenon beacon, outdoor - AS371 UTC Fire & Security
Triple IR (IR3) Flame Detector - Explosion Proof enclosure 40/40C-I SharpEye Spectrex
Sounder-beacon, multi tone, shallow base, mains powered AS366M
Sounder-Beacon, 32 Tones user selectable, shallow base, mains powered - AS366M UTC Fire & Security
Alarmline II Analogue LHD Cable w/ Nylon Sheath AAN-0500
Analogue Linear Heat Detection (LHD) cable with Nylon Sheath Alarmline II, 500m - AAN-0500 - ProReact F3003
VOC Gas Detector (Benzene) 0-1000 ppm Gas Detector - Explosion Proof Enclosure Version S5029BZ-LD
Volatile Organic Compound Detector, VOC Detector Benzene 0-1000 ppm 4-20mA - PID sensor SMART3G-C2-LD Sensitron Explosion Proof Enclosure with LED version Zone 1 category 2 areas S5029BZ-LD
Reflective Optical Beam Smoke Detector FIREBEAM range from 5 to 40m
English (UK)
Français (FR)







