Smoke Ventilation Control Panel 2 lines 3 drive groups 16A
Smoke Ventilation Control Panel 2 lines 3 drive groups 16A 24VDC Metal Housing RZN 4416-M D+H
RZN4416-M - Smoke Ventilation Control Panels 24VDC/16A, 2 Lines, 3 Drive Groups
The RZN 4416-M electric smoke vent control system is mainly provided in building objects such as industrial and office buildings, glass extensions or atriums. The controller offers a high equipment standard and operation comfort. An integrated service timer for monitoring of the maintenance rate, numerous connectible functions for alarms and faults and adjustable functions like a time limit for ventilation and stroke-arresting device are as much part of the standard of this system as internal fault and diagnostic indicators.
FEATURES & BENEFITS
- Compact alternative solution in comparison to plug-in solutions
- Stabilised output voltage
- Central pcb with 1 plug-in slot for functional module
- Conn. of max. 8 smoke vent buttons + 14 fire detectors per line (only D+H approved detectors permissible)
- Line monitoring for short circuit and interruption
- Switchable smoke vent safety functions: fault = alarm, smoke vent resetting and smoke detector remote reset
- Possibility of combination of smoke vent / BMS function
- Double smoke vent system as alternative to single systems, e.g. for two staircases
- Lockable steel sheet housing, surface type; connection possibility for optical and acoustical alarm devices
- 72-hour emergency supply in case of power failure
- Temperature-controlled accumulator charging
- Accumulator charging and condition control
- Very low power consumption during power failure (only 2 x accumulators of type 3 required)
- Ventilating time and opening width adjustable
- Possibility of connecting rain detectors or wind/rain detectors without supplementary module
- VdS approval no.: G 50600
- TUV Product Service certificate number: B 06 05 22802 024
TECHNICAL SPECIFICATIONS
- Power supply: 230VAC / 50Hz, 500VA
- Output: 24VDC (21,6 ... 28,5V), max. 16A
- Class of rating -monitoring: continous duty
- Class of rating -alarm / ventilation: short-time duty
- Protective system: IP 54
- Temperature range: -5°C ... +40°C
- Housing: steel sheet
- Colour: RAL 7035, light grey
- Dimensions WxHxD: 500 x 500 x 210mm
Shipment: central pcb, surface-type steel housing with lockable steel sheet door, spare key, without accumulators
Recently Viewed
Smoke Ventilation Control Panel 2 lines 3 drive groups 16A
Smoke Ventilation Control Panel 2 lines 3 drive groups 16A 24VDC Metal Housing RZN 4416-M D+H
UV-IR 4.5 μm Flame Detector 40-40L4B
UV/IR 4.5 μm Flame Detector with Buit-In Test - Explosion Proof enclosure 40/40L4B for hydrocarbon-based fuel fires and non-organic fires SharpEye Spectrex
Spare gasket for duct detector DDH1
Emerson HART Hand-Held Diagnostics Unit (ATEX I.S. Approved) c/w converter and cable harness (1m), software and manual in case. 888810 - Spectrex
IS MCP with Flexible element MCP3AR000FF01IS
Red Intrinsically Safe MCP Indoor Call Point with Flexible element and changeover contact MCP3A-R000FF-01IS Morley-IAS
Expansion module 4 inputs 16 Outputs STPL4ESP
Expansion module 4 inputs, 16 Open Collector Outputs for ST.PL4 and ST.PL4+ Gas Control Panel Sensitron ST.PL4/ESP
Tie Wrap (Pack of 100) - 170°C (338°F) - A1176
LPG Gas Detector - Explosion Proof Enclosure Version S2097GP
LPG Gas Detector, GPL Gas Detector, Liquid Petroleum Gas Detector 0-100% LFL 4-20mA - Catalytic sensor - SMART3G-C2 Sensitron Explosion Proof Enclosure version Zone 1 category 2 areas S2097GP
VOC Gas Detector (Isobutylene) 0-20 ppm Gas Detector - Explosion Proof Enclosure Version S3541IL
Volatile Organic Compound Detector, VOC Detector 0-20 ppm (Isobutylene) 4-20mA - PID sensor SMART3G-C2 Sensitron Explosion Proof Enclosure version Zone 1 category 2 areas S3541IL
Analogue Multi-Sensor ACC-EN-WHT/SIL
Analogue Multi-Sensor Photoelectric/Heat, white case, SIL2 approved ACC-EN(WHT)/SIL Hochiki
English (UK)
Français (FR)


