2.5 to 30m Microwave Monostatic Sensor FM30-BT
2.5 to 30m MicroWave Monostatic Sensor with Bluetooth FM30-BT 9.375GHz - Forteza
FM30-BT - 2.5-30m Microwave Monostatic Sensor, Bluetooth, 9.375 GHz - FORTEZA
Sensors are used to detect an intruder in the protected area. Objects to protect can be separate areas of the perimeter, open and closed sites, storehouses, tunnels, trestles, etc.
Operating principle : The sensor has one electronic module including a transceiver. The transmitter emits microwave energy into the protected area. At normal conditions where there isn’t any intrusion Rx establishes a signal testing level reflected from objects in the protected area.
When an intruder moves in this area, he makes changes in the signal testing level; the receiver registers these changes and generates an alarm.
Thanks to the unique technology - division of the detection zone into subzones – the sensors are allowed to be insensitive to objects outside the detection zone even to trucks, trains or planes.
Sensors can be adjusted from the sensor`s unit or using special software which displays noise, original signal level and allows setting the optimal operating mode even remotely from the control room.
Detection length : 30m
Detection width : 5m
Detection zone height : 8m

FEATURES & BENEFITS
The detection zone is divided into subzones with possibility to adjust each of them separately. Thanks to this function sensors have high detection probability keeping at the same time minimum false alarms.
Disconnecting subzones it can be organized a free passage for people or transport through the gate or entrance to the building. Moreover using soſtware it can be possible to organize passages by time.
The unique signal processing algorithm and possibility to disconnect the first subzone reduce considerably the influence from neighboring objects and raise the noise immunity to rain, snow, fog, lightning, small animals and low vegetation.
Sensors have the frequency splitting into so-called “frequency letters” allowing them to operate in close proximity to each other.
Sensors can be connected to many popular control panels.
Recently Viewed
Alarmline II Digital LHD Cable 105°C (221°F) w/ PP Sheath AD105P-1000
Digital Linear Heat Detection (LHD) cable 105°C (221°F) with Polypropylene Sheath Alarmline II, 1000m - AD105P-1000 - ProReact F1077
Alarmline II Digital LHD Cable 105°C (221°F) w/ PVC Sheath AD105-1000
Digital Linear Heat Detection (LHD) cable 105°C (221°F) with PVC Sheath Alarmline II, 1000m - AD105-1000 - ProReact F1068
Distance Piece (Pack of 100) - Zintec - A1170
R1234ZE Gas Detector GDR450I10
R-1234ze refrigerant Gas Detector, HFO-1234ze Gas Detector 0-2000 PPM 4-20mA Relay, Display & Buzzer - Infrared sensor, for non classified area GDR450I10 - Tecnocontrol
R1234ZE Gas Detector GDR453I10
R-1234ze refrigerant Gas Detector, HFO-1234ze Gas Detector 0-2000 PPM 4-20mA Relay, Display & Buzzer - Infrared sensor, for non classified area GDR453I10 - Tecnocontrol
Mini IR3 Triple IR Flame Detector 10-40m Range for non-classified areas 20/20MI-1-F SharpEye SPECTREX
Flame Simulator to test all Spectrex Single IR Flame detector - FS-1300 Spectrex
English (UK)
Français (FR)







